I just want to confirm that you can reboot from the serial port. That's
all that is new. It may not be enough to reboot from the serial port for
either L,R crate or the roc be in a messed up state that a power reset is
absolutely needed.
bottom line, you can now send commands to both roc's via their serial
ports.....
-- ________________________________________________________________________________ Tancredi Botto, phone: +1-617-253-9204 mobile: +1-978-490-4124 research scientist MIT/Bates, 21 Manning Av Middleton MA, 01949 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^On Mon, 15 Dec 2003, Karen Dow wrote:
> > For the right ROC (blrocf3), it will be interesting to see if > reboot works from the serial port. Earlier today, it didn't work from > telnet, or from front-panel RESET. It would only reboot on a power-cycle. > > Karen > > At 03:04 PM 12/15/2003 -0500, Tancredi Botto wrote: > > >Please note that we can now kermit into both the L and R sector > >crates from opitrig and thus reboot both fastbus controllers > >through a serial port connection. This saves you a trip to the > >D-tunnel and it allows you to look for any terminal messages > >Before we could only have one serial connection at the time > > > >The serial port connections are automatically started from the > >setup command. The commands are rocR_start and rocL_start, which > >automatically start a shell on opitrig1. > > > >The VME/controller prompt is > > > >-> > > > >type reboot to reboot. > > > >-- > >________________________________________________________________________________ > >Tancredi Botto, phone: +1-617-253-9204 mobile: > >+1-978-490-4124 > >research scientist MIT/Bates, 21 Manning Av Middleton MA, > >01949 > >^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ >
This archive was generated by hypermail 2.1.2 : Mon Feb 24 2014 - 14:07:30 EST