It is pretty simple: Continue to take polarized D2 data as it is.
-- o --
Dump current:
The latest fills show that the beam current just shortly after
the injection (~160mA) is about 145mA. Thus, for 145mA maximum
current the dump current is set to 101mA.
Beam polarization & tune:
The average beam polarization for the last 8 hours is 61.6 +-
0.8% It was agreed that we should continue to take data
overnight, and reconsider tuning if it becomes worse.
ABS:
The shift personal should also keep an eye on "ABS RF
measurements" errors in yellow terminal on ABS computer, and
should call me or Ernie Ihloff if such a problem occurs.
Taylan
-- ---=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--- Taylan Akdogan Massachusetts Institute of Technology akdogan@mit.edu Department of Physics Phn:+1-617-258-0801 Laboratory for Nuclear Science Fax:+1-617-258-5440 Room 26-402b ---=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=---
This archive was generated by hypermail 2.1.2 : Mon Feb 24 2014 - 14:07:31 EST