# Ideal coordinates of the WC survey targets.  Taken from the CAD model.
#
# Coordinates are in the BLAST system (X towards centre of ring, Y vertically
# up, Z along electron beam, origin at the target centre).
#
# These data are for the left sector.  Right sector has opposite X value.
#
# These data are for the top survey targets.  Bottom has opposite Y value.
#
# In Karen's notation these are LCT[I/M/O][U/D][I/O] for Left Chamber, Top,
# Inner/Middle/Outer, Up/Down-stream, Inner/Outer.
#
# Note survey targets are 7.94 mm long while tooling balls are 12.7 mm long.
# Their axes are NOT vertical !!! but perpendicular to the plane of the top
# (bottom) outer surface of the WC. The top plane is nominally given by the
# plane formed by the extreme corner targets LCTIUI, LCTIDI, LCTOUO, and
# LCTODO which is NOT the same as the plane defined by the extreme corner
# targets of an individual chamber!
# 
# The following data is I/M/O, U/D, I/O, X, Y, Z [mm] 
#
#                                                 - D.K. Hasell 19/3/2006
#
0 0 0  839.88 293.37  124.05
0 0 1  997.97 353.84  178.15
0 1 0  468.19 139.41 1382.08
0 1 1  626.28 199.88 1436.19
1 0 0 1225.34 453.03  150.80
1 0 1 1479.52 553.30  238.17
1 1 0  682.10 228.01 1989.47
1 1 1  936.27 328.28 2076.84
2 0 0 1651.16 624.40  297.58
2 0 1 1822.56 700.41  357.53
2 1 0  964.96 340.16 2620.11
2 1 1 1136.36 416.18 2680.06