Hello Adam,
you can find the default values in the NC_CC_TOF_1300.sql file in
~/commis/hv. Generally speaking the low value there is 500 V. For the
cerenkov you may want to put in the values from a *_10percent*.sql file
Please include the spill monitor HV, whic you find in NC_CC_TOF_1300
I do not know if it makes sense to adjust ramp up speeds of tofs/ccs but
we should if those detectors are slower than the wch hv.
-- ________________________________________________________________________________ Tancredi Botto, phone: +1-617-253-9204 mobile: +1-978-490-4124 research scientist MIT/Bates, 21 Manning Av Middleton MA, 01949 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^On Wed, 16 Apr 2003, Adam Jon DeGrush wrote:
> > Hi, > > Since the EPICS controlled HV is about to come online I need some > additional information on the HV channels, information that is not in the > SQL files that were used in the last ring run. Specifically each channel > will have it's own rampup rate, rampdown rate and trip current. I have > entered those values for the wire chamber but I need to do it for the > other detectors too. These include the TOF's, Cerenkovs, neutron counters, > and compton polarimeter(and others if people plan to add them to the hv > control). Even if you plan to use the default settings, I will still add > those into the database just in case you would like to change and save > them in the future. If you have any question the detector owner can talk > to me individually. > > > Thanks, > Adam > >
This archive was generated by hypermail 2.1.2 : Mon Feb 24 2014 - 14:07:29 EST